Posts Tagged ‘Nebraska’

Legislative Update: White House Plans to Release Full Budget and New CTE Research

Friday, May 21st, 2021

This week, the White House shared an updated timeline for the release of a full budget proposal. Read below to learn more about what to expect, as well as the next scheduled hearing in Congress for reauthorization of the Workforce Innovation and Opportunity Act (WIOA) and new data on Career Technical Education (CTE).

Administration Schedules Full Budget Release

On Thursday President Joe Biden announced that the full Fiscal Year 2022 (FY22) budget request from the White House will be shared on Friday, May 28. This is a change from the previously scheduled release date of Thursday, May 27. The upcoming proposal follows the April release of a “skinny budget” request which included a $29.8 billion increase for U.S. Department of Education (ED) programs. 

Advance CTE will be monitoring the full budget release and the implications for CTE.  

House Plans Second WIOA Hearing 

The House Committee on Education and Labor’s Subcommittee on Higher Education and Workforce Investment will hold the second of three hearings on the reauthorization of WIOA on Thursday, May 27 at 12:00pm EST. The hearing will be on “Creating Employment Pathways for Dislocated Workers.” The first subcommittee hearing on WIOA reauthorization took place last week and was about “Creating Opportunities for Youth Employment.” An overview of the topics discussed during that hearing can be found here.  

Advance CTE recommendations for reauthorization of WIOA can be found here. This resource includes strategies to: 

New Research Shows Impact of CTE on Postsecondary Outcomes 

Written by Hannah Neeper, Policy Research Associate, Association for Career and Technical Education (ACTE). Original post can be found here. 

CTE concentrators are seven percent more likely to graduate from high school on time and 10 percent more likely to enroll in postsecondary education within two years of graduating compared to non-CTE concentrators, according to a new report from the Institute of Education Sciences’ Regional Education Laboratory Central (REL). REL worked together with education leaders in Nebraska and South Dakota to examine the impact of secondary CTE on graduation rates and postsecondary enrollment and completion within two to four years. The researchers sought to answer two research questions throughout their analysis:  

  1. What is the impact of being a CTE concentrator on high school graduation, two-year and five-year postsecondary enrollment and completion, and type of postsecondary award attained?  
  2. How do high school graduation and two-year and five-year postsecondary outcomes vary by career cluster? 

For the first question, overall, the data showed positive impacts of a learner being a CTE concentrator. Not only did the data show that CTE concentrators were more likely to graduate from high school on time and enroll in postsecondary education, but these learners were also more likely to earn a postsecondary award within two and five years of graduation. Findings from the second research question focused on learner outcomes of concentrators in each career cluster. The researchers found that regardless of the career cluster, high school graduation rates were consistently higher than those learners who were non-CTE concentrators. Regarding specific career clusters, learners in finance, marketing, health sciences, and government and public administration had the highest two- and five-year postsecondary enrollment rates. Learners in transportation, distribution and logistics, had the highest two-year postsecondary award attainment rates, yet the third lowest for five-year postsecondary award attainment rates. 

The researchers conclude that the findings provide evidence that state and local education agency leaders can use when determining whether to fund, strengthen or expand CTE programs. These findings also suggest that CTE concentrators might have a greater likelihood of completing a certificate, diploma or associate degree, and almost as high a chance of completing a bachelor’s degree, as other students—challenging misperceptions that CTE is not academically rigorous. The researchers encourage students and families to use these findings when deciding whether and how to participate in CTE programs. They also encourage education leaders to look at the postsecondary enrollment and attainment rates across career clusters to better align CTE programs with local, regional and state workforce needs.

Meredith Hills, Senior Associate for Federal Policy

By admin in Legislation, Uncategorized
Tags: , ,

This Week in CTE

Friday, August 28th, 2020

We have compiled a list of highlights in Career Technical Education (CTE) from this week to share with you.

WEBINAR OF THE WEEK 

Advance CTE hosted the final webinar of our Summer Learning Series: CTE’s Role in the Future of Work and our Economic Recovery. This webinar featured insights on the current economic downturn and how CTE can rise to meet the challenge and ensure each learner is prepared for economic mobility.

You can view the webinar recording and presentation material here

STUDENT STORY OF THE WEEK

Keilah Sadler has earned a construction degree from the Metro Community College Career Academy in Nebraska one year after graduating from high school. Taking CTE courses allowed Keilah to develop her future career plans while building self-confidence. Read more about Keilah’s story in this article published by the Omaha World-Herald.

INDUSTRY OF THE WEEK

This week, MxD and the ManpowerGroup released the The Hiring Guide: Cybersecurity in Manufacturing. This hiring guide is a playbook for manufacturing executives, HR departments, educators and policy makers as these groups work together to cultivate a talent pool and workforce to protect the digital interface of the manufacturing industry, now and in the future. Download the guide here

TWEET OF THE WEEK

LEGISLATIVE UPDATE OF THE WEEK

This week, the House CTE Caucus hosted a briefing, The Effects of COVID-19 on Career Technical Education. Speakers included a CTE student, CTE instructor, State CTE Director and employer, moderated by Advance CTE’s Meredith Hills, discussed each of their unique perspectives on how they adapted to remote learning, the challenges unique to CTE, and opportunities for the future. 

The panelists included:

– Makenna Glassman – Welding Academy Student, Gateway Technical College, Elkhorn, WI

– Bob Kilmer – Retired Construction and Architecture Instructor, Enumclaw High School, Enumclaw, WA

– Angel Malone – Director of Career and Technical Education, South Carolina Department of Education  

– Public Sector Representative – Apple, Inc.  

RESOURCE OF THE WEEK

Louisiana piloted the Building Employment Skills for Tomorrow (BEST) program in 2018 to expand work-based learning opportunities for learners with disabilities. The BEST program connects learners with disabilities to work-based learning opportunities, equips them with real-world skills through training and provides mentorship to program participants. Louisiana continues to ensure learners with disabilities have the support necessary to participate and succeed in meaningful work-based learning and career readiness activities.

View the policy profile in our Learning that Works Resource Center.

Brittany Cannady, Digital Media Associate

By admin in Advance CTE Resources, COVID-19 and CTE, Resources, Webinars
Tags: ,

K-12 School Reopening Plans: Exemplars for CTE

Wednesday, August 26th, 2020

As schools begin to reopen and learners begin their classwork nationwide both virtually and in-person, the health and safety of students remains at the forefront of educators’ and administrators’ minds. Throughout the summer, state educational agencies (SEAs) published school reopening guidance to help schools make informed decisions about the best course of action for their students and school community while maintaining safe practices. Whether continuing to educate virtually or in-person, these guidelines are as varied as the local plans that implement them. 

Considering the varied nature of these plans and the special circumstances that often underlie the logistics of implementing Career Technical Education (CTE) for a school district or throughout a region, Advance CTE tracked school reopening plans for each state and analyzed how they implicated CTE. The tracker that resulted can be found here. As of writing, 33 states’ reopening plans mention CTE in any way, including cursory mentions or health- or sanitation-specific guidance (see figure 1). Of those 33, 12 have robust CTE-specific guidance either embedded in their state reopening plan or as a separately published document. While each of these warrants viewing and merits discussion, we have chosen four plans to highlight due to their breadth or depth or because they have an innovative element that distinguishes their plan from others. While these highlighted plans are not the only examples of strong CTE-specific guidance, they can serve as models for other state agencies looking to further develop guidance of their own as schools continue to reopen and local education agencies (LEAs) continue their transition to in-person education.

 

 

 

 

 

 

 

 

Figure 1. (Last updated 8/24)

Minnesota

Minnesota’s state reopening guidance (last updated 8/21; CTE guidance on pages 95-101) provides comprehensive information about CTE throughout the state including guidance for classroom/laboratory instruction, work-based learning, career development and advising and career and technical student organizations (CTSOs). It also provides links to dozens of resources that are program-specific or unique to a particular program.

New York

New York’s state reopening guidance (last updated 7/16; CTE guidance on pages 103-108) provides similarly robust information across a variety of CTE topics. Beyond content and delivery and CTSO guidelines, this reopening plan also includes information about industry partnerships, guidelines for students with disabilities and standards for program approval, Perkins V and other data reporting. 

Nebraska

Nebraska’s CTE-specific guidance (published 8/4) provides guidance and guidelines for special classroom settings unique to CTE as well as general CTE guidance. They utilize “Guiding Principles of Nebraska CTE” (included within) to inform the document. Further, the setting-specific guidelines are delineated based on the reopening status of the state, which provides for flexibility across time. 

Tennessee

Tennessee’s CTE-specific guidance (published 7/15) provides in-depth guidelines not only for all areas of CTE, but also for how content is delivered (in-person, hybrid or virtual). Their plan draws from the Association for Career Technical Education (ACTE)’s High-quality CTE: Planning for a COVID-19-Impacted School Year (published in June), which asks guiding questions to ensure all considerations are discussed when undertaking school reopening at the local levels.

Finally, Advance CTE has its own guiding questions in the workbook Prioritizing CTE Through and Beyond COVID-19 that can be utilized by those at the state level to help employ quality and equity principles throughout reopening strategy. Additional resources can be found on our COVID-19 resources page.

Dan Hinderliter, Policy Associate

By admin in COVID-19 and CTE, Uncategorized
Tags: , , , , ,

This Week in CTE

Friday, August 14th, 2020

We have compiled a list of highlights in Career Technical Education (CTE) from this week to share with you.

STATE CTE DIRECTOR OF THE WEEK

This week Advance CTE welcomes Elizabeth Bennet! Elizabeth has been a part of the CTE community for 20 years in Massachusetts and now serves as the state’s Associate Commissioner for College, Career and Technical Education. Read more about Elizabeth here.

VIDEO OF THE WEEK

Nebraska CTE has welcomed back their CTE teachers, virtually, with great appreciation and gratitude.

CAREER DEVELOPMENT CONTINUUM OF THE WEEK

Johnson County Public Schools in North Carolina has published and shared their new career development continuum during their recent CTE symposium held for new and returning CTE teachers. This career development continuum highlights career exploration in the early learning years and ensures there are transitions from secondary education to postsecondary attainment to the workforce. 

LEGISLATIVE UPDATE OF THE WEEK

Advance CTE and the Association for Career and Technical Education (ACTE) are continuing to advocate for direct funding for CTE and workforce programs to be included in the next relief package. This would ensure learners are prepared for labor market needs, particularly as the economy begins to rebuild after the pandemic. We need your help to emphasize this message with Congress. Click here to ask your representatives in Congress to support the inclusion of funding for CTE, as provided in the Relaunching America’s Workforce Act, in the next relief package.

RESOURCE OF THE WEEK

Business partnerships are critical to the success of delivering high-quality CTE programs of study, yet building and sustaining meaningful partnerships remains one of the biggest challenges faced by state and local CTE leaders. Advance CTE and Ford Next Generation Learning partnered to host two roundtable discussions (in Nashville, Tennessee and Pinellas County, Florida) with employers, big and small, who are deeply involved in CTE in their communities to learn more about why and how employers can support and strengthen CTE programs. 

In Their Words: Why Business Leaders Support CTE, Career Pathways and Career Academies offers successful strategies and recommendations for other communities as they consider their own employer engagement and recruitment strategies. 

View the resource in our Learning that Works Resource Center.

Brittany Cannady, Digital Media Associate

By admin in Advance CTE Resources, Resources
Tags: , , , ,

This Week in CTE

Friday, June 26th, 2020

We have compiled a list of highlights in Career Technical Education (CTE) from this week to share with you.

VIRTUAL CONFERENCE OF THE WEEK

Nebraska Career and Technical Education (CTE) held a Virtual Symposium, which was the first of its kind for the state. There were more than 700 CTE district, state and national level attendees. Among them were Commissioner Matt Blomstedt and Scott Stump, U.S. Assistant Secretary for Career, Technical, and Adult Education for the Office of Career, Technical and Adult Education.

During the symposium, winners of the annual Nebraska Excellence in Career and Technical Education Awards and Richard Katt Outstanding Nebraska Career and Technical Educators Awards were announced. Read more about the symposium and learn more about the award winners here

STUDENT OF THE WEEK

In Michigan, one student has shown great leadership by joining Governor Gretchen Whitmer’s Return to Learn Council. Dominic Gonzalez is one of the district’s dual enrollment learners, which allows him to attend a local community college and earn college credit while still in high school. Dominic will be tasked with providing Governor Whitmer and the council a student perspective of what returning to school should look like in the fall. Read more in the article published by The Detroit News.

VIDEO OF THE WEEK

Texas CTE students did not let graduation or the pandemic stop them from completing one meaningful project. Engineering and veterinary science students developed a prosthetic paw for a local puppy who suffered complications at birth. View this video for highlights from the project, prototypes of the prosthetic paw and the student’s stories. 

LEGISLATIVE UPDATE OF THE WEEK

The U.S. Department of Education approved four more state plans under the Strengthening Career and Technical Education for the 21st Century Act (Perkins V): Arkansas, Mississippi, Nevada and Tennessee. 35 state plans are approved in total so far. Check out this chart to see which states have been approved, and links to the state plans.   

RESOURCE OF THE WEEK

Launched in 2016, JPMorgan Chase & Co. New Skills for Youth is a $75 million, five-year global initiative aimed at transforming how cities and states ensure that young people are career ready. The local investments from across the world – Innovation Sites – aim to identify and implement the most promising ideas in career education, with a special focus on communities with the greatest needs. Over the past year, Advance CTE has released a series of snapshots documenting the progress of the local investments. This week, Advance CTE released the final two snapshots featuring investments in the Greater Washington Region and Germany.

Brittany Cannady, Digital Media Associate

By admin in Uncategorized
Tags: , , , , , , ,

Middle Grades CTE: Standards, Curriculum & Assessment

Tuesday, May 12th, 2020

There is widespread agreement that high school is too late to begin to expose learners to careers and the foundational skills needed to access and succeed in careers, but there remains a lack of consensus about what CTE and career readiness should entail at the middle grades level.

Advance CTE, with support from ACTE, convened a Shared Solutions Workgroup of national, state and local leaders to identify the core components of a meaningful middle grades CTE experience. This collaboration resulted in Broadening the Path: Design Principles for Middle Grades CTE and a companion blog series exploring each of the core programmatic elements of middle grades CTE defined in the paper. In this first entry in the blog series, we will examine the core programmatic element of standards, curriculum and assessment.

As the backbone of a robust middle school CTE experience, middle grades CTE curriculum should ensure that students are exposed to careers across all 16 Career Clusters®, supplemented by opportunities to dig deeper into career areas of interest. Curriculum and assessments should be based on clear, consistent standards that integrate academic, employability and, where appropriate, foundational technical skills and align to other relevant standards across the education continuum.

A number of states have developed, or are in the process of developing, standards for middle grades CTE and career development. Idaho has taken a rigorous approach to this work, partnering with Education Northwest to gather input from stakeholders through a statewide survey, regional focus groups and research on middle grades standards in other states. This process has led to a set of standards organized around three questions—“Who am I?” (self-evaluation), “What’s out there for me?” (career exploration) and “How do I get there?” (future planning). Ten schools will pilot the standards and associated materials in the 2020-21 school year.

In addition to standards development, states have created curriculum, lesson plans and assessments to help bring CTE and career exploration into the middle grades. For instance, Nebraska has developed a Career Development Model and Toolkit that includes a library of lesson plans for PK-12 learners that can be filtered by each of the state’s career readiness standards. The Technical Assistance Center of New York has developed rubrics to support CTE teachers in assessing life/career competencies in the middle grades. Teachers can create their own customized rubrics.

On the local level, Peoria Unified School District in Arizona has built a two-year curriculum for seventh- and eighth-grade students called Technology, Life & Careers (TLC). The TLC curriculum includes classroom- and lab-based instruction across multiple CTE subject areas as well as career assessments and interest inventories, work-based learning experiences and career and technical student organizations. The program culminates with students taking a deep dive into their career areas of interest and beginning their state-mandated Education and Career Action Plans.

As you reflect on this element of middle grades CTE in your state, district or school, consider such questions as:

For additional resources relevant to middle grades CTE standards, curriculum and assessment, check out the Middle Grades CTE Repository, another deliverable of this Shared Solutions Workgroup.

By Kate Blosveren Kreamer in Middle Grades CTE
Tags: , , , , ,

Aligning to Opportunity: State Approaches to Setting High Skill, High Wage and In Demand

Thursday, January 23rd, 2020

The Strengthening Career and Technical Education for the 21st Century Act (Perkins V) places a strong emphasis on the alignment of Career Technical Education (CTE) programs of study with state, regional and local economies. The legislation requires Perkins-funded programs to prepare students for “high-skill, high-wage, or in-demand occupations.” These terms — high skill, high wage and in demand — are foundational to Perkins V, appearing in both the purpose of the law and the definition of CTE.

As with many Perkins V requirements, the responsibility of defining these terms rests solely with states, providing them with a major opportunity to set a meaningful bar for determining which career opportunities anchor their CTE programs. The stronger focus on labor market alignment compels state CTE leaders to ensure that all program offerings are relevant to today’s economy and that learners will participate in CTE programs with data-driven and validated labor market value.

Advance CTE newest paper, Aligning to Opportunity: State Approaches to Setting High Skill, High Wage and In Demand, describes some approaches that states are taking to partner across agencies to access and review labor market information; develop definitions for high skill, high wage and in demand; provide local flexibility, while maintaining guardrails; and disseminate the information widely to key audiences.

For example:

For more, including specific definitions used by the states mentioned above and others, read Aligning to Opportunity: State Approaches to Setting High Skill, High Wage and In Demand.

The report was made possible by the generous support of the Joyce Foundation.

Kate Kreamer, Deputy Executive Director

By Kate Blosveren Kreamer in Publications, Resources
Tags: , , , , , , ,

How States Are Leveraging ESSA to Advance Career Readiness

Monday, April 1st, 2019

By now the consensus in the education community is clear: in addition to a strong academic foundation, students should be able to access other experiences in high school — physical education, the arts, Career Technical Education (CTE) — that provide added value to their education and increase the likelihood of postsecondary success.

The notion that high schools should provide a “well-rounded education” was codified in the Every Student Succeeds Act (ESSA) in 2015. The law, which Congress passed with bipartisan support, provides several opportunities for integrating CTE and other well-rounded learning opportunities into the traditional high school experience, which Advance CTE has covered extensively on this blog and in our publications. More than four years after the law was passed, some states have begun to leverage these opportunities to advance career readiness  in high school.

Expanding Opportunities for Each Child in Ohio

One often overlooked opportunity in ESSA is the Direct Student Services (DSS) provision. DSS allows states to set aside up to 3 percent of their basic Title I grants to help local education agencies expand access to advanced coursework and CTE. Only two states — Louisiana and New Mexico — opted to use the allowance in their submitted ESSA plans. But they were soon joined by Ohio, which decided in 2018 to leverage the DSS allowance to launch a new grant program called Expanding Opportunities for Each Child.

The program has two primary objectives: developing and expanding access to career pathways that culminate in high-value credentials and promoting access and success in advanced coursework such as Advanced Placement (AP) and International Baccalaureate (IB). These objectives are aligned with Ohio’s strategic priorities for secondary education, which emphasize postsecondary readiness and preparation for college and career. Ohio’s decision to use the DSS allowance was based on the idea that freeing up additional resources would help local education agencies better support student achievement and transitions to post-high school pathways.

In July 2018, Ohio awarded more than $7.2 million in three-year grants to 17 recipients. Fourteen will be conducting career pathways development and three will be expanding access to AP and IB courses. A second round of applications is expected to be issued later in the 2018-19 school year.  

Building Capacity for STEM Learning in Georgia

Though the Title IV Student Support and Academic Enrichment grant program, Congress authorized funding to the tune of $1.6 billion to enhance well-rounded education, school safety and the effective use of technology in schools. While the program has not been fully funded by Congress, it still provides significant resources to help schools deliver a well-rounded education, including CTE and Science, Technology, Engineering and Mathematics (STEM) education.

While most states have left the determination of how to spend Title IV funds up to local leaders, some have issued guidance or put together trainings to help schools leverage their resources in service of statewide priorities for career readiness.

Georgia is one such example. In its ESSA plan, the state committed to using Title IV funds to strengthen school counseling, computer science and STEM. Since then, Georgia has used Title IV funds to hire two full-time STEM coordinators, one in the southwest region and one in the southeast region. The coordinators are working to build STEM learning opportunities for schools and strengthen STEM pipelines in their areas. Additionally, Georgia has allocated Title IV funds to develop an online STEM incubator learning pathway to help district and school leaders navigate the process for certifying STEM schools.

Curating CTE Open Educational Resources in Nebraska

Another state that is using Title IV funds to boost career readiness is Nebraska. Leaders in the state are using Title IV funds to recruit CTE teachers to curate and develop educational resources aligned with college and career content area standards. This is a key feature of the state’s new Open Educational Resources (OER) Hub, which was launched in February 2019 and provides open access resources aligned with Nebraska’s college and career ready standards.

The work is still in the early stages, but Nebraska hopes to build out the CTE resources in the OER Hub later this summer by engaging CTE teachers to share, curate and develop rigorous digital resources that can be adopted and modified in the classroom. The state will provide stipends and cover travel expenses for participating CTE teachers. While this work is starting with three career areas — business, marketing, and management; communication and information systems; and human sciences and education — Nebraska plans to expand the resources to the remaining three state-identified career areas soon.

States made bold commitments in their ESSA plans to expand access to advanced coursework and career pathways. This is best demonstrated by the fact that 40 states are now measuring career readiness in their state and federal accountability systems. But few states are going the extra mile to align ESSA implementation with their plans for career readiness. Ohio, Georgia and Nebraska demonstrate three different approaches states can take to advance career readiness through ESSA.

Austin Estes, Senior Policy Associate

By admin in Public Policy
Tags: , , , , , ,

Numerous Governors Celebrate and Commit to Advancing CTE in 2019

Monday, February 4th, 2019

As is tradition at the beginning of the legislative sessions, numerous governors have presented their policy agendas in their annual addresses to their state legislatures. These addresses provide an opportunity for the 20 new governors to highlight their legislative priorities. Many of the State of the State Addresses highlighted successes related to Career Technical Education (CTE) and governors’ commitments to advance CTE in 2019.

Many governors celebrated successes of previous and existing initiatives in their speeches. In Arizona, Governor Doug Ducey celebrated the 99 percent high school graduation rate for students in Arizona CTE programs. In Connecticut, Governor Ned Lamont proposed increasing access to vocational technical schools and apprenticeships and celebrated the successes of students at a new Career Academy in Waterbury, CT. Meanwhile, in New Jersey, Governor Phil Murphy celebrated the creation of more than 100 new apprenticeship programs in the past year.

Governors also emphasized the importance of advancing equity in their states. In Iowa, Governor Kim Reynolds proposed creating a new program called “Computer Science in Elementary,” which will integrate computer coding into class lessons at six high-poverty elementary schools. In Delaware, Governor John Carney proposed a statewide commission comprised of community leaders who will recommend steps to help disadvantaged students succeed.

Other governors set goals for the year and called for additional funding for CTE. In Indiana, Governor Eric Holcomb set a goal for 60 percent of Hoosier adults to have a high-value credential beyond high school. In Nebraska, Governor Pete Ricketts celebrated that the Developing Youth Talent Initiative, which connects middle school students to work-based learning opportunities in the manufacturing and IT sectors, has impacted 7,000 students to date and called on the state to increase funding for the initiative by $1.25 million. In Washington, Governor Jay Inslee proposed a budget that would allow 100,000 students to participate in paid internships and apprenticeships over the next 10 years.

In total, more than 12 governors have celebrated or made commitments to foster CTE in their states during their State of the State Addresses. Advance CTE will continue to monitor the State of the State Addresses as they happen for their relevance to CTE.

To learn about CTE related policies that governors prioritized in 2018, join Advance CTE, ACTE and a state leader to discuss 2018 CTE related policies in more depth on February 14 – to register for the webinar click here.

Brianna McCain, Policy Associate

By admin in Uncategorized
Tags: , , , , , , , ,

Advance CTE Report Describes How State Leaders Can Build Trust with Historically Marginalized Communities

Tuesday, January 15th, 2019

Throughout history, and continuing today, learners of color, low-income learners, female learners and learners with disabilities have been historically tracked into terminal vocational programs leading to jobs with uncertain promise of economic growth and prosperity. To help state leaders recognize these historical barriers and adopt promising solutions to close equity gaps in CTE, Advance CTE launched a series of policy briefs titled Making Good on the Promise. The first briefs in the series explored the history of inequities in CTE and highlighted promising practices from states that are using data to identify and address access and achievement gaps by different learner populations.

Building off these briefs, the third brief in the series, Making Good on the Promise: Building Trust to Promote Equity in CTE, maps out steps state leaders can take to rebuild trust in marginalized communities that CTE historically failed to serve equitably. The brief outlines five steps state leaders can take to build trust in communities that do not view CTE as a viable mechanism to help them achieve their college and career goals:

To helps states with these steps, the brief features state examples from Oklahoma, Wisconsin, Massachusetts, Idaho and Nebraska and draws on messaging data from Advance CTE’s The Value and Promise of Career Technical Education: Results from a National Survey of Parents and Students:

Brianna McCain, Policy Associate

By admin in Publications, Resources
Tags: , , , , ,

 

Series

Archives

1